USB Hub

Boards – PCBWay

USB HUB BOM – 10 Boards

J1 is the DC Power jack; you can use a DC splitter like this one to power the board using your DE10 nano PSU.

The board has multiple footprints for the DC jack and some of the USB jacks so you can position them in a number of ways.

U2 EEPROM is an optional part to store device ID info on, so can be left off of this build.

For the USB connection, I am still working on a more elegant solution but for now a cable has to be soldered to the board.

Currently no plans to sell this yet but I will update if that changes.